TEIN Flex Z Coilovers – 18-25 Honda Accord (1.5T / 2.0T / Hybrid) | 16-Way Adjustable | VSHL0-CUAA4-C

The complete TEIN kit.

The TEIN Flex Z is TEIN's complete coilover system for the Accord. It comes with its own upper mounts: pillowball mounts up front with camber adjustment, and reinforced rubber mounts in the rear. So you don't have to buy anything separately to get the alignment control. It's a twin-tube design with 16-level damping adjustment, so you can set it softer for the commute or firmer for a spirited drive.

Ride height adjusts through the full length of the coilover. The Flex Z uses 6 kgf/mm (336 lb/in) springs front and rear, which is stiffer than TEIN's Basis Z and Advance Z kits. The front adjusts about 0.8 to 2.9 inches below stock, and the rear about 1.2 to 3.1 inches. The dampers are sealed units, finished in TEIN's green powder coat to resist rust, with no-sag springs.

It's compatible with TEIN's EDFC electronic damping controller (sold separately), and it carries a 1-year warranty.

But this isn't just about getting low.

It's about a coilover that's ready to go on the car as a complete kit: dampers, springs, and upper mounts, with front camber you can adjust. If you want the full TEIN setup for your Accord without piecing it together, this is it.

⭐ Local pickup in Pico Rivera: free. Order online and we order it in for you. We'll text you when it arrives, and you pick it up at our showroom, 9501 Slauson Ave.

🚚 Shipping to the lower 48 is calculated at checkout. In-stock kits ship next business day. If your kit has to be ordered in, we'll confirm the timing right after you order.

📞 Questions on fitment or trim? Call (562) 366-4516 or text (562) 270-5361, happy to help

Features

Genuine TEIN Flex Z coilover set, front and rear

16-level damping force adjustment

Front pillowball upper mounts with camber adjustment, rear reinforced rubber mounts

Full-length ride height adjustment

Springs: 6 kgf/mm (336 lb/in) front and rear

Twin-tube sealed dampers with TEIN green powder coat

No-sag springs

EDFC compatible (controller sold separately)

1-year warranty

Part Number: VSHL0-CUAA4-C

Vehicle Compatibility

2018-2025 Honda Accord (1.5T, 2.0T, and Hybrid)

Touring models with ADS need the TEIN SPS12-R2238 canceller kit (sold separately)

Why Buy From JDM CARBOY?

✔ Genuine TEIN Products

✔ Free Local Pickup

✔ Expert Fitment Assistance

✔ Installation Available

✔ Financing Available at Checkout

✔ Serving the JDM Community Since 2001

Professional installation and a full alignment after installation are recommended.